30kW output with 25kW dedicated to water and 5kW to the room. The boiler is a full wraparound with the baffle constructed as part of the water jacket ensuring maximum heat output. The design ensures a rapid heat transfer.
CO burn technology burns off any excess gas in the chamber.
76% Efficiency rating (Based on wood)
When burned correctly wood is probably the most environmentally friendly way to heat your house. Wood is a renewable heat source that requires minimal processing.
Boiler must be cross flowed (flow from one side return from the other)
Ensure a Heating Engineer sizes your heating system before purchase
Must be installed in an open vented system
Stove must not be run unless plumbed
Heats up to 18 single radiators or 85000 BTU's
Very fast heat up time, due to the water running through the baffle system Full wraparound boiler including the baffle. 6 year extended warranty. Made from 5mm steel. Designed and manufactured in Ireland for the Irish market.
12-14 Paschals
No, it is dangerous. It will also void your warranty and will pose a serious health and safety risk.
No. A competant installer will create a solution which will help your problem whether it be draught reduction or increased draught. There are many solutions on the market.
No the stove must be cross flowed so as to allow proper circulation within the boiler.
No, you must be a qualified heating engineer or competant installer/Plumber. The stove must be installed in accordance with local building regulations.
Yes, and the more space you have around the stove the better to leave the air circulate freely. The bare minimum would be 180mm each side
Only if you have a HRV heating system or cannot for some reason put a vent on the wall. Building regulations must be followed.