Attack DPX Wood Gasification Boiler

The ATTACK DPX range of Wood Gasification boilers are designed for economic and cost-effective heating of homes and small businesses. Fuelled by dry wood and pellets, the modern and innovative design allows for burn time up to 8–12 hours.

• Quality electronics with fluent PID regulation of fan rotations according to the flue gas temperature
• High-efficiency tubular exchanger “flue gas-water” with turbulators
• Burns soft and hard wood and wood briquettes, and capable of burning larger logs – length of the feeding chamber is 580 mm (in models 25 kW and higher)
• Suction fan for balanced and effective burning, and dustless operation
• Automatic regulation of the heat-up flap, which is connected with the door of the feeding chamber
• Fluently modulated fan rotations
• Automatic boiler stop when fuel burns out, and equipped with aftercooling circuit against overheating of boiler in the water
• Option of Lambda modification – the most advanced technology for the burning process regulation, which ensures maximum efficiency and low emissions.
• Option for left or right door
• Refractory pieces are resistant up to the temperature of 1,350 °C, which ensure better parameters of burning

Technical Information

1. Boiler body
2. Front upper cover
3. Feeding door
4. Door of the combustion chamber
5. Suction fan
6. Chimney
7. Primary air suction
8. Secondary air suction
9. Boiler thermostat
10. Reset of emergency thermostat
11. Flue gas thermostat
12. Inlet valve
13. Main switch
14. Thermo-manometer
15. Aftercooling circuit
16. Cover of the cleaning opening
17. C.H. flow connection
18. C.H. return connection
19. Pull rod of the chimney flap
20. Lever of turbulators
21. Control panels
22. Electrical fuse