The Boru 900i Inset StoveOutput: 14kW Room Heater
If you want to make a statement in your home then this is the stove for you! The 900i comes standard with a set of electrically powered fans as standard so the heat can be vented where its needed. There are also 2 venting ducts fitted on top of the stoves so hot air can be directed into other rooms. Black Glass front and frames are also available to add that extra oooomph100% Made in Tipperary, Ireland
If you want to make a statement in your home then this is the stove for you! The 900i comes standard with a set of electrically powered fans as standard so the heat can be vented where its needed. There are also 2 venting ducts fitted on top of the stoves so hot air can be directed into other rooms. Black Glass front and frames are also available to add that extra oooomph
100% Made in Tipperary, Ireland
Airwash System
For an unobstructed view of the landscape inspired fire.
Airwash is the preheating of air and the funnelling of that air down the front of the glass. This ensures a clear view of the fire.
Clean Burn
Co2 Burn technology for a cleaner burn. C02 Burn Technology is the secondary burn of gas which would normally be emitted into the atmosphere. It means that you are doing your bit for the environment while saving hard earned cash. Who would have thought that helping to save the planet could also help save money.
Central Air Intake (Optional)
Optional Central Air Intake Available (outside air feed). Central Air Intake is using air from outside the dwelling to draught the stove. It means that when you are using your stove there is no energy taken from the room the stove is in so therefore the stove is even more efficient. It is worth noting that Central Air Intake cannot be added on it must be factory fitted at time of order.
Output
14kW output insert stove with forced convection to insure efficient delivery of heat where it's needed. Requires a power supply Combustion is achieved using a vermiculite lined firebox, easy to use controls all terminating in an 8" opening. from an unswitched spur unit.
Trim (Frame) Explanations
- Standard trim 3 sided 50mm, suitable for use at ground level. A good example would be installation in a fireplace. The 50mm is the width of the trim (frame)
- Standard trim 4 sided 50mm. A good example would be installation in a plain wall where the trim (frame) will act like a picture frame
Other off the shelf sizes available in 3 and 4 sided are:
75mm
100mm
As all products are made in Tipperary we can also manufacture bespoke trims.
Simplicity
- Large landscape glass viewing area
- Large ash tray for easy removal and minimum mess
- Cool touch handle
- 2 speed fan
- Safety probe ensuring the fan cuts in at 75 degrees
- Can duct warm air into other rooms
- Optional trims available
- Glass door and trims available
- Woodburning and multi-fuel options available
- 8" Flue Pipe
Top Tips
Minimum opening required is 990mm wide
Stove must be insulated
8" Chimney required
Unswitched spur unit required within 1 meter of stove for power supply
Stove must be connected to an 8" chimney and sealed correctly
Stove must not be fitted with a timber mantle piece
The Environment
75% Efficiency rating (Based on wood)
When burned correctly wood is probably the most environmentally friendly way to heat your house. Wood is a renewable heat source that requires minimal processing.
Options
Black glass options available
Enquire about other colours
Double Sided Boiler Option available
The Boru Stove Output calculator will give you an idea of the maximum kW output required for your room. If the room has poor insulation, vaulted ceilings or an offstandard shape then it is important to increase the required kW's upwards. Fill in the rooms dimensions below in mtrs or feet.
Heat Output Calculator
Simply key in your room measurements, and press "Calculate" to find the heat output required to adequately heat your room.
0 kW of heat output required
Note: For optimal output, please use fuel that has a moisture content of 20% or below.